Ist noch kein NMEA2000 Netzwerk vorhanden, so kann mit dem Backbone Starter-Kit die Grundinfrastruktur aufgebaut werden.
Für die Erweiterung eines bestehenden Netzwerks bieten wir eine große Auswahl an vorkonfektionierten NMEA2000-Kabeln mit Micro-C Steckern, aber auch mit Steckverbindern nach dem RayNet-Standard.
Für den Einsatz auf kleinen bis mittleren Yachten empfehlen wir die "normalen" NMEA 2000 Kabel von Navico, bei größeren Abständen zwischen den Geräten sollten aber die "Medium-Duty" Kabel eingesetzt werden.
Sind Sonderlängen gefragt, kann man mit den entsprechenden Schraubsteckern und einem NMEA2000-Kabel als Meterware auch leicht eigene Kabel konfigurieren.
Zusätzlich zu den Kabeln bieten wir Zubehör wie Endwiderstände, T-Stücke, 4-Wege-Verteiler und Schutzkappen.
4 veins plus shieldingCable outer diameter 4.6mmThe prices are given for cuts per meter. Special prices for entire rings or roles are available. If necessary, simply inquire about the required amount. Discount of 10 % when decreasing ≥ 50 m and 15 % when accepting ≥ 100 m. The discount is automatically taken into account when determining price.
Micro-C connector for self-assembly, suitable for use in NMEA2000 networks.-Robust, quality components-Schraubkontakte 0.25 to 0.75 mm²Cable gland having gland Ø 4 - 6 mm-As a replacement for damaged connector-After By drawing a line-Selbstbau of NMEA2000 compounds-And much more...
€11.90*
€13.40*(11.19% saved vs. recommended price)
NMEA2000 connectors with screw connectionsNMEA2000 / Micro-C connector suitable for self-assembly.-As replacement for damaged connectors-After pulling through a line-And much more ... nmea2000 coupling (female)
This adapter cable enables the connection of a N2K/NMEA2000 device with micro-C connector (e.g. Simrad, B&G, Furuno, Weatherdock, ICOM, HUMMINBIRD) to a Raymarine Seatalkng network.Micro-c: femaleSTNG: FemaleLength: 0.4 metersRaymarine article number: A06045Alternatives:A06075 1.0 mA06079 0.1 m
Micro-C connector for self-assembly, suitable for use in NMEA2000 networks.- Robust, high-quality components- screw contacts 0.25 to 0.75 mm²- cable entry gland with Ø 4 - 6 mm- As a replacement for damaged connector- After swiping a line- self-construction of NMEA2000 connections- And much more...
€22.30*
€24.00*(7.08% saved vs. recommended price)
This set contains the most important parts to build a NMEA2000 network.This is needed in order to connect with one another plotter instruments, autopilots, AIS devices, encoders and sensors.Scope of delivery:- 3x T-connector (as branch points)- Power cables (power supply for the bus and some sensors, instruments)- Terminators pair male / female (terminating resistors bus line)- 4.50 m N2K cable (as a branch-line or bus line used)(The terms backbone or bus master all the main line designate NMEA2000® network)