Autopiloten für Motorboote und -yachten von SIMRAD

OHNE Basisstation

For sailing boats of 30 & rsquo; - 40 & rsquo;, up to approx. 10.5 t displacement. Compact and more efficient than most hydraulic and electromechanical drive units.Electromechanical coupling, lever with pin bolts and integrated RF300 rudder and 12 V connection.Max. Torque 1370 Nm, control lever of the drive unit length 250 mm(A NAC3 is required).

Simrad autopilotet for boats up to 10m in length, with hydraulic control.The set contains AP 44 control unit, autopilot computer NAC-2, Precision-9 compass and a pump-2 pump and NMEA2000-based cabling.Simrad - AP44 Autopilot controllerThe AP44 Autopilot Controller combines Simrad Continuum control technology with a full color display, intuitive turntable and key control as well as the modern Glass helmet styling.Free the hands of tax wheel, cruise with comfort and discover new opportunities to look for fish.This special controller offers easy access to automated turn patterns, no-drift control, deep contour tracking and other extended pilot functions.Connect your card plotter to add navigation via path points and routes, and enjoy the full autopilot control of compatible Simrad displays.Product characteristics:· Visually bound 4.1-inch color display· Extra wide 170-degree display angle· Simrad Continuum tax technology· Intuitive autopilot control with simple menus and waterproof silicone buttons· Quick and easy course setting via rotary control· Automatic turn pattern for fuel-saving freehand maneuvers· The no-drift control also keeps you on course against wind and tide· The deep contour tracking makes fishing on riffs and just abyss· Simple furnishings thanks to automatic fine adjustment and calibration· Flaches Glass helmet design· Low energy consumption· Certified NMEA 2000® connectionTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Electricity consumption 1.4 W· Network load 3 len· Color: Black· Waterproof IPX7Navico - NAC -2 Autopilot Computer - Medium CapacityThe NAC-2 autopilot computer is the control center behind your Simrad Autopilot system. It contains the electronics that are required to operate a hydraulic control pump or a mechanical drive, and also interacts with other components such as course sensors and rowing reserves. The NAC-2 is designed for boats of up to 10 meters (35 feet) length and is suitable for the operation of weak streams, mechanical drive units and solenoid valves (8 amps throughout/16 amps).Main characteristics· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for ships up to 10 meters (35 feet) length· Low power output with continuous 8 amps, 16 amps maximum load· Clutch output (3 amps max.)· Compatible with low -power power pumps, mechanical drives, hydraulic linear drives and solenoid valves· Virtual rowing feedback for simplified installation on board external board and boats with rear -wheel drive (inner board/outboard)· Supports Simrad RF25 rowing units· Plug-and-play connections for a simple installation· NMEA 2000® Connection to course sensors, rowing residers, dedicated autopilot controls and multifunction displaysNavico-Precision-9 compass sensorThe Precision-9 compass provides precise course and rotary speed information on Simradrad's autopilot, radar and navigation systems via NMEA 2000®. The Solid-State sensors continuously measure movement and course parameters over nine axes. In addition, the Precision-9 compass also provides information on compatible devices about ribbon, tapping and stamping movements. A easily adjustable assembly brake and the connection via a single data cable enable the installation on board almost every ship, including installation on the mast of ships with steel hull.Main characteristics· Course, rotary speed, ribbon, tapping and pounding movements via NMEA 2000®· Precise and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable assembly brain enables installation on the Schott or higher on the mast· Waterproof according to IPX7 standard, suitable for installation on the mast in ships with steel hull· Simple installation using a single NMEA 2000® connection· A compact sensor records course, rotary speed, ribbon, tying and pounding movements· Reliable solid-state sensor technology without freely moving parts· Simple and inexpensive installation· Suitable for all trunk types by installing the mast, including steel hull ships· Dimensions (BXTXH) 119 x 119 x 36mmNavico - Pump -2, 12 V, 0.8 L (formerly RPU80) Autopilot drive unitThe pump-2 is a reversible hydraulic control pump for boats up to 35 feet. It is used in connection with the Autopilot Computer NAC-2 as part of an autopilot system.Main characteristics· Reversible pump· 80 - 250 ccm· Power supply 12V - (2.4-6a)· Max. Boat length 35ft000-13291-002 is the successor of 000-13291-001. Small change: hydraulic connections on the pump.

SD10 mechanical drive unit for NAC-2-autopilot computer.The drive is suitable for 25-37-foot sailing boats with 6 feet and electromagnetic coupling with an over-controller function, built-in rowing and 12 V power supply.

with spinning-bolt DD15. Length: 400-500 mm. (15.7 '' - 19.7 '').

RF70N Medium-duty rudder rudder feedback unit. NMEA2000 interface, comes with transmission link and pre-attached 5.5m cable.

Suncover / protective cover for AP70mk2. Also fits AP80, MX610 and MX612.

AD80 Analog Drive PCB for rudder/thruster, to be mounted in AC85 Autopilot Computer cabinet.

A2004 Autopilot pack with A2004 controller, AC70 Autopilot computer, RF300 rudder feedback and a Precision-9 magnetic compass. For use with non-IMO professional vessels. For reversible pumps or non-isolated solenoid valve controls. Add either an AD80 or SD80 for thruster control.

Rower with resistant output / variable voltage.Suitable for NAC-1 and NAC-2 Autopilot Computer.Delivery with 15 m (50 FT) Connection cable with a connector for direct connection to the AP computer.

HS70 Programming Cable

INSTALL KIT AP44

The AP48 autopilot controller is a first class operator unit in modern glass helmet design, which was developed specifically for Continuum autopilot systems.The AP48 that has been developed a special value on responsiveness and user friendliness was placed under all conditions, has a large aluminum knob as well as dedicated 'fast access keys' which the adjustment of the bearing to port or starboard in single or ten-degree increments allow.With an optically connected 4.1-inch display and intuitive user interface of the AP48 allows full access to the expanded Continuum control functions, including automated turning pattern, no-drift control, depth contour tracking and more.Key features- Intuitive autopilot menu with extended keypad- Large rotary knob for precise control, the highest demands- Continuum control technology- Optical connected 4.1-inch color display- Ultra Next 170-degree viewing angle- Dedicated A-degree or ten-degree quick access buttons for setting after baking / starboard- Automated reversal pattern for fuel-efficient hands-free maneuvers- The NoDrift control without drift keeps your course against wind and tide- Depth Contour Tracking makes fishing easier in areas with rocky outcrops and slopes- Easy setup with automatic tuning and calibration- Flat Glass helmet design- Certified NMEA 2000® portIntuitive autopilot menu with extended keypadThe AP48 combines the intuitive operation of the compact AP44 with a larger knob, dedicated 'Quick Access Keys' and other enhanced keypad controls.The knob of the AP48 ensures precise control, while the quick access buttons enable fast Peilungsänderungen in single or ten degree increments.The large, designed for optimum control in all conditions rubberized buttons on the AP48 can very well operate with wet hands or gloves.Continuum control technologyEach Simrad control innovation is based on sixty years of experience in the development of the autopilot, which continues today in Autopilot Research Center for Simrad Yachting in Norway.Illustrative of this legacy is the Continuum algorithm: the software that drives the Simrad control technology.Continuum control brings many years of research and experience on the water in your rudder system, for an intelligent autopilot, allowing you to leave the steering wheel on trust.Simrad autopilot solutions are available for a wide range of applications: from small pleasure boats to large commercial vessels.Optically connected 4.1-inch color displayTo ensure maximum visibility under all conditions, the color LCD display is optically connected with its protection glass envelope - characterized fogging and condensation can be prevented in the display area.Transflective LCD technology uses reflected sunlight by brightens the display rather than obscured.Compared to traditional backlit display so excellent daylight visibility and reduced power consumption can be achieved.Integrated turn patternsYour Simrad autopilot can hold far more than you on track.The AP48 provides easy access to a variety of installed reversal patterns that help you or fishing or diving assist you in conducting a quick and efficient U-turn.Select a turn, select port or starboard and off you go.If you want more control, you can adjust the turn pattern to drive complex spirals, zigzags and other useful maneuvers.No drift controlThe no-drift mode integrates the GPS navigation and car control; while the position is being used by your boat, in order to counteract the effects of wind and tide.This allows you to maintain a straight course over ground on your current course, having to manually without a waypoint or a route.To take advantage of this powerful feature, the AP48 just have a connected via NMEA 2000® GPS receiver or compatible Simrad chartplotters are combined.Depth Contour TrackingConnect your AP48 autopilot system with a compatible sounder module to enable depth contour tracking.In this mode, the AP48 provides by car control that is below your boat a constant water depth is maintained - to be perfectly designed for the effects of depth contours while fishing or sailing without complex routes with multiple waypoints.Easy setup with automatic fine tuningInstallation and commissioning of the autopilot do not have to be time consuming or complicated.By means of a simple commissioning using on-screen instructions of the AP48 allows automatic tuning for optimal control car, including mooring configuration and sea trials.The automatic compass calibration is possible with the Simrad Precision-9 solid-state compass.This allows the autopilot setup is further simplified and ensures the rate accuracy.Flat 'Glass Helm' designDesigned for use with Simrad Glass helmet displays, instruments and operating units that AP48 has a modern design with a flat recessed profile of only eight millimeters (without knob).Thanks to the intelligent layouts display and control panel of the AP48 of practical size, but while he has a total of a small footprint, which allows easy installation almost anywhere.To ensure even greater flexibility, the controller next to the flat installation is also suitable for fixing by means of a strap holder.

FU80 Follow UP remote unit with display. Take command and Mode buttons. Provides course change in Auto mode.

Steer-by-wire Volvo EVC Kit for IPS (includes NAC-D, Precision 9, Volvo Gateway)

AP70MK2 Professional Autopilot Controller. Designed to meet the needs of mariners aboard a variety of professional vessels. With both non-SOLAS and SOLAS system configurations available, it delivers professional autopilot performance to everyone.

Simrad - Op12 Autopilot control panelThe SIMRAD OP12 pilot controller can be combined with the IS42 instrument display into a fully functional autopilot control panel. Take full control over the autopilot with the simple key field with seven keys, it was designed for safe and reliable operation under all conditions.The pilot controller benefits from B&GS intelligent sailing-specific functions for compass and wind control and, with Smart Tack and Smart Gybe, ensures simple and safe maneuvers, the integration of Zeus MfDS or vulcan card plotters, delivers space and route navigation.Product characteristics:· Intuitive operation· Easy installation· Combine with IS42 instrument display for full pilot control· Compatible with the new Simrad Nac-2 and NAC-3 pilot computers· Flat design· NMEA 2000® certifiedTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Electricity consumption 1.4 W· Network load 3 len· Color: Black· Waterproof IPX7

NF80 Non Follow Up remote unit with display. Take command and Mode buttons. Provides course change in Auto mode.

HS70 NMEA0183 & Power Cable - 15m

SIMRAD - S35 Non Follow Up Steering LeverDesigned for indoor and outdoor mounting. Proven industrial and ruggedized design for use in harsh working conditions on deck.

NF80/FU80/QS80 bulkhead Mounting Kit

The AP44 autopilot controller combines Simrad Continuum control technology with a full color display, intuitive hub and key management as well as the modern glass helmet styling.Get rid of the reach of the steering wheel, you cruise with comfort and discover new ways to search for fish.This special controller provides easy access to automated turning pattern, no-drift control, depth contour tracking and other advanced pilot functions.Connect your plotter to add to Navigation waypoints and routes, and enjoy the full autopilot control of compatible Simrad displays.Alternatively, you can use the AP44 IS42 and OP12, the combination of Simrad.Product features:· Optical bound 4.1-inch color display· Extra-wide 170-degree viewing angle· Simrad Continuum control technology· Intuitive autopilot control with simple menus and waterproof silicone keys· Quick and easy course adjustment via rotary switch· Automatic turning patterns for fuel-efficient hands-free maneuvers· The no-drift control also keeps you from wind and tide on track· The depth contour tracing fishing on reefs and abysses makes it easy· Easy setup with automatic tuning and calibration· Flat Glass helmet design· Low energy consumption· Certified NMEA 2000® portTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Power consumption 1.4 W· Network load 3 LEN· Color: Black· Waterproof IPx7

AD80 Analog Drive Module for analog signal control of rudder or a thruster using analog voltage or low level current.

Simrad Autopilotet for ships over 10m in length, with hydraulic control.The set contains AP 44 control unit, autopilot computer, precision-9 compass and a pump-3 (formerly RPU-160) pump.Simrad - AP44 Autopilot controllerThe AP44 Autopilot Controller combines Simrad Continuum control technology with a full color display, intuitive turntable and key control as well as the modern Glass helmet styling.Free the hands of tax wheel, cruise with comfort and discover new opportunities to look for fish.This special controller offers easy access to automated turn patterns, no-drift control, deep contour tracking and other extended pilot functions.Connect your card plotter to add navigation via path points and routes, and enjoy the full autopilot control of compatible Simrad displays.Product characteristics:· Visually bound 4.1-inch color display· Extra wide 170-degree display angle· Simrad Continuum tax technology· Intuitive autopilot control with simple menus and waterproof silicone buttons· Quick and easy course setting via rotary control· Automatic turn pattern for fuel-saving freehand maneuvers· The no-drift control also keeps you on course against wind and tide· The deep contour tracking makes fishing on riffs and just abyss· Simple furnishings thanks to automatic fine adjustment and calibration· Flaches Glass helmet design· Low energy consumption· Certified NMEA 2000® connectionTechnical specifications:· Dimensions 60 x 115 x 32 mm (2.4 x 4.5 x 1.3 inches)· Weight 0.12 kg (0.3 lb)· Electricity consumption 1.4 W· Network load 3 len· Color: Black· Waterproof IPX7Navico - NAC -3 Autopilot Computer - High CapacityThe NAC-3 autopilot computer is the control center behind its Simrad Autopilot system. It contains the electronics that are required to operate a hydraulic control pump or a mechanical drive, and also interacts with other components such as course sensors and rowing reserves. The NAC-3 is designed for boats with 10 meters (35 feet) length or more and is classified for the operation of high streams, mechanical drive units and solenoid valves (30 amps throughout/50 amps).Main characteristics· Reliable autopilot performance based on the Simrad Continuum control technology· Recommended for ships over 10 meters (35 feet) length· High current output with 30 amps, 50 amps maximum load· Clutch output (3 amps max.)· Compatible with high -stream drive pumps, mechanical drives, hydraulic linear drives and solenoid valves· Virtual rowing feedback for simplified installation on board external board and boats with rear -wheel drive (inner board/outboard)· Supports Simrad RF25 and RF300 rowing units· NMEA 2000® Connection to course sensors, rowing residers, dedicated autopilot controls and multifunction displays· NMEA 0183® inputNavico-Precision-9 compass sensorThe Precision-9 compass provides precise course and rotary speed information on Simradrad's autopilot, radar and navigation systems via NMEA 2000®. The Solid-State sensors continuously measure movement and course parameters over nine axes. In addition, the Precision-9 compass also provides information on compatible devices about ribbon, tapping and stamping movements. A easily adjustable assembly brake and the connection via a single data cable enable the installation on board almost every ship, including installation on the mast of ships with steel hull.Main characteristics· Course, rotary speed, ribbon, tapping and pounding movements via NMEA 2000®· Precise and reliable semiconductor sensor electronics· Course accuracy of +/- 2 ° after calibration· The easily adjustable assembly brain enables installation on the Schott or higher on the mast· Waterproof according to IPX7 standard, suitable for installation on the mast in ships with steel hull· Simple installation using a single NMEA 2000® connection· A compact sensor records course, rotary speed, ribbon, tying and pounding movements· Reliable solid-state sensor technology without freely moving parts· Simple and inexpensive installation· Suitable for all trunk types by installing the mast, including steel hull ships· Dimensions (BXTXH) 119 x 119 x 36mmNavico - RPU160 Autopilot drive unitThe RPU160 is a reversible hydraulic control pump for boats up to 50 feet. It is used in connection with the AC42 autopilot computer as part of an autopilot system.Main characteristics· Reversible pump· Medium flow rate· 160-550 ccm· Power supply 12V - (3-10A)· Boat length (m) 35-50ft