€134.40*
% €158.27* (15.08% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1971945
EAN:
8719076034063
Manufacturer product ID:
PIN241371200
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Victron - Phoenix inverter 24/375 Ve.direct Schuko"
Ve.direct communication connection
The VE.Direct connection can be connected to the following devices:
-With a computer (Ve.direct to USB interface cable required)
- With Apple and Android smartphones, tablets, macbooks or other devices
(Ve.direct Bluetooth Smart Dongle required).
Fully configurable:
- threshold values for triggering and resetting alarms with a low loading status of the battery.
- swelling values for switching off and restarting at low battery voltage values.
- Dynamic switching off: load-dependent switch-off threshold value
- Output voltage 210-245V
- Frequency 50Hz or 60Hz
-threshold value for ECO mode on/off and Eco mode sensor
Monitoring:
- and output voltage, % load and alarms
Proven reliability
The complete bridging with a ring transformer panel has proven itself for years.
The inverters are short -circuit -resistant and before overheating (whether by overloading or by the
Ambient temperature caused).
High switch -on performance
This is used to switch on loads such as voltage formers for LED
-Lamps, halogen lamps or electric tools.
Eco mode
In ECO mode, the inverter switches to standby as soon as the load under a preset value
drops off. In standby mode, the inverter then switches on for a short period of time (regulated
Standard setting: every 2.5 seconds). If the load exceeds a preset threshold, remains
the inverter switched on.
Remote-controlled input/output
A remote-controlled insertion/off switch can be used with a two-pin connector or between the plus pole of the
Connect the battery and the left contact of the two -pin connector.
LED diagnosis
Please note the description in the manual.
Load switching on another changeover of alternating current: the automatic transfer switch
We recommend our Filax Automatic Transfer Switch for our low-performance inverter. With the
Filax is switched very quickly (in less than 20 milliseconds), so that an interruption -free
Operation of computers and other electronic devices is guaranteed.
The VE.Direct connection can be connected to the following devices:
-With a computer (Ve.direct to USB interface cable required)
- With Apple and Android smartphones, tablets, macbooks or other devices
(Ve.direct Bluetooth Smart Dongle required).
Fully configurable:
- threshold values for triggering and resetting alarms with a low loading status of the battery.
- swelling values for switching off and restarting at low battery voltage values.
- Dynamic switching off: load-dependent switch-off threshold value
- Output voltage 210-245V
- Frequency 50Hz or 60Hz
-threshold value for ECO mode on/off and Eco mode sensor
Monitoring:
- and output voltage, % load and alarms
Proven reliability
The complete bridging with a ring transformer panel has proven itself for years.
The inverters are short -circuit -resistant and before overheating (whether by overloading or by the
Ambient temperature caused).
High switch -on performance
This is used to switch on loads such as voltage formers for LED
-Lamps, halogen lamps or electric tools.
Eco mode
In ECO mode, the inverter switches to standby as soon as the load under a preset value
drops off. In standby mode, the inverter then switches on for a short period of time (regulated
Standard setting: every 2.5 seconds). If the load exceeds a preset threshold, remains
the inverter switched on.
Remote-controlled input/output
A remote-controlled insertion/off switch can be used with a two-pin connector or between the plus pole of the
Connect the battery and the left contact of the two -pin connector.
LED diagnosis
Please note the description in the manual.
Load switching on another changeover of alternating current: the automatic transfer switch
We recommend our Filax Automatic Transfer Switch for our low-performance inverter. With the
Filax is switched very quickly (in less than 20 milliseconds), so that an interruption -free
Operation of computers and other electronic devices is guaranteed.