

€2,199.40*
% €2,315.00* (4.99% saved vs. recommended price) previously €2,199.40*will be ordered for you
Lead time: 5 days (according to manufacturer**),
est. total delivery time: approx. 1 week
Product number:
1970968
EAN:
4250327478341
Manufacturer product ID:
0 4525 0023
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Philippi - ACTICLADER ACE 24/100 - 24 V / 100 A"
Automatic charger for medium and large battery systems for the individual charge of up to 3 battery groups (starter, service and bug battery) and capacities of up to 1000 AH.
The large models of the ACE series are also equipped with the most modern switching power supply technology and deliver the full charging capacity up to an ambient temperature of 50 ° C.
Full performance is always available in the Mediterranean environment.
The automatic detection of the AC input voltage in conjunction with the wide AC input voltage range of 90 - 265 V/47 - 65 Hz ensures that the device can be used worldwide without performance losses.
This always supplies the full charging capacity regardless of the AC power source or generator.
The light and stable aluminum housing can be installed quickly and safely using the supplied wall bracket.
The devices are optimized with regard to moisture protection and cooling for wall mounting.
The electrical connection area is covered by a front -side flap and enables safe installation and protected from environmental influences.
The front-side LED state indicator provides information about the device state, optionally a 2.4 “color-TFT monitor can be integrated.
The device cooling is via a regulated fan.
The 5-stage loading characteristic for fast and complete charging for all battery types: lead-acid, maintenance-free, calcium-tin, AGM, gel, lithium, custom characteristic, power supply mode.
The temperature sensor contained in the scope of delivery adapts the charging characteristic to the battery temperature.
A PSM monitor can be connected to the integrated P-bus (ACE-T cable required) Interface to remove the charge.
- charging current: 100 a
- Nominal voltage: 24 V
-Rec. Battery capacity: 400-1000 AH
- Input voltage range: 90 - 265 VAC (47 - 65 Hz), efficiency typical 87%
- AC power recording 230/115 V: 15.1 A / 30.2 a
- Outputs: 3, each output can hand over the maximum charging current
- Connection bolts: M8
- Dimensions (LXBXH): 270 x 410 x 130 mm
- Weight: 7.5 kg
- Charging characteristics: iu or iuou adjustable by internal dip switch.
- Battery types: wet, gel, AGM, lead-kalcium, lifepo4, dc power supply mode, free characteristic
- Conservation voltage: 28.8 V / 27.6 V DC (Lead of Lead Setting)
- Cooling: Microprocessor controlled fan <50 DBA at 1M
- Operating temperature range: nominal operation of -20 ° C to +50 ° C, performance reduction above 50 ° C. Automatic shutdown over 60 ° C
- Storage temperature: -20 ° C to +70 ° C, relative moisture up to 96% without condensation
- Housing / protection type: powder -coated aluminum, protection class IP23, fastening screws M6
- Device protection: Input overvoltage protection due to VDR - Destruction does not fall below the guarantee / polarity protection by triggering the security / short -circuit protection / overheating protection through device shutdown
Available from the 1st quarter of 2018
The large models of the ACE series are also equipped with the most modern switching power supply technology and deliver the full charging capacity up to an ambient temperature of 50 ° C.
Full performance is always available in the Mediterranean environment.
The automatic detection of the AC input voltage in conjunction with the wide AC input voltage range of 90 - 265 V/47 - 65 Hz ensures that the device can be used worldwide without performance losses.
This always supplies the full charging capacity regardless of the AC power source or generator.
The light and stable aluminum housing can be installed quickly and safely using the supplied wall bracket.
The devices are optimized with regard to moisture protection and cooling for wall mounting.
The electrical connection area is covered by a front -side flap and enables safe installation and protected from environmental influences.
The front-side LED state indicator provides information about the device state, optionally a 2.4 “color-TFT monitor can be integrated.
The device cooling is via a regulated fan.
The 5-stage loading characteristic for fast and complete charging for all battery types: lead-acid, maintenance-free, calcium-tin, AGM, gel, lithium, custom characteristic, power supply mode.
The temperature sensor contained in the scope of delivery adapts the charging characteristic to the battery temperature.
A PSM monitor can be connected to the integrated P-bus (ACE-T cable required) Interface to remove the charge.
- charging current: 100 a
- Nominal voltage: 24 V
-Rec. Battery capacity: 400-1000 AH
- Input voltage range: 90 - 265 VAC (47 - 65 Hz), efficiency typical 87%
- AC power recording 230/115 V: 15.1 A / 30.2 a
- Outputs: 3, each output can hand over the maximum charging current
- Connection bolts: M8
- Dimensions (LXBXH): 270 x 410 x 130 mm
- Weight: 7.5 kg
- Charging characteristics: iu or iuou adjustable by internal dip switch.
- Battery types: wet, gel, AGM, lead-kalcium, lifepo4, dc power supply mode, free characteristic
- Conservation voltage: 28.8 V / 27.6 V DC (Lead of Lead Setting)
- Cooling: Microprocessor controlled fan <50 DBA at 1M
- Operating temperature range: nominal operation of -20 ° C to +50 ° C, performance reduction above 50 ° C. Automatic shutdown over 60 ° C
- Storage temperature: -20 ° C to +70 ° C, relative moisture up to 96% without condensation
- Housing / protection type: powder -coated aluminum, protection class IP23, fastening screws M6
- Device protection: Input overvoltage protection due to VDR - Destruction does not fall below the guarantee / polarity protection by triggering the security / short -circuit protection / overheating protection through device shutdown
Available from the 1st quarter of 2018