€139.90*
% €149.90* (6.67% saved vs. recommended price)2 in stock
Available, delivery time: 1-3 business days
Product number:
1298701
EAN:
4250327457308
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Bilgewatch electronic bilge pump switch"
with detection for oil and fuel in the bilge water
- Detects oil or fuel in the bilge water and the pump stops
- Protects such water against pollution and the skipper of punishment
- Deep-contacts for early detection of bilge water
- Easy to install, move Height / actuation point adjustable
Conventional float switch switch a bilge pump in liquid slump
automatically. But there are also supplies such as Gasoline, grease, diesel,
Engine or hydraulic oil in the bilge they will be without distinction outboard
pumped into the nature and significant environmental damage can cause. the
Skipper also threaten addition, severe penalties.
BilgeWatch minimizes this risk because BilgeWatch detects the media and
interrupts the power supply to the pump when the sensor with environmentally unfriendly substances
comes into contact. Simply put, water is pumped to the rescue of the boat,
the hazardous materials remain the proper disposal (eg. as used oil container
in port) on board. BilgeWatch is easy to install. Existing float switch
for 12 and 24 V pump (max. 20 A) can be easily replaced.
- quiescent current consumption less than 0.5 mA
- delay, not any water splashing off the pump immediately
- Recovery time about 3 sec.
- sensitivity: about 33 kO
- Contact: semiconductor (wear-free, inductive protection against switch-off diode (45 A)
- function range -20 ° C to + 70 ° C
- Installation height: just over pumps slots readjusted using supplied mounting sleeve
- Detects oil or fuel in the bilge water and the pump stops
- Protects such water against pollution and the skipper of punishment
- Deep-contacts for early detection of bilge water
- Easy to install, move Height / actuation point adjustable
Conventional float switch switch a bilge pump in liquid slump
automatically. But there are also supplies such as Gasoline, grease, diesel,
Engine or hydraulic oil in the bilge they will be without distinction outboard
pumped into the nature and significant environmental damage can cause. the
Skipper also threaten addition, severe penalties.
BilgeWatch minimizes this risk because BilgeWatch detects the media and
interrupts the power supply to the pump when the sensor with environmentally unfriendly substances
comes into contact. Simply put, water is pumped to the rescue of the boat,
the hazardous materials remain the proper disposal (eg. as used oil container
in port) on board. BilgeWatch is easy to install. Existing float switch
for 12 and 24 V pump (max. 20 A) can be easily replaced.
- quiescent current consumption less than 0.5 mA
- delay, not any water splashing off the pump immediately
- Recovery time about 3 sec.
- sensitivity: about 33 kO
- Contact: semiconductor (wear-free, inductive protection against switch-off diode (45 A)
- function range -20 ° C to + 70 ° C
- Installation height: just over pumps slots readjusted using supplied mounting sleeve