€37.90*
% €39.90* (5.01% saved vs. recommended price)will be ordered for you
Lead time: 5 days (according to manufacturer**),
est. total delivery time: approx. 1 week
Product number:
1977880
EAN:
4250214607359
Manufacturer product ID:
0 8200 0255
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "PHILIPPI - Sicherungsblock ESF5"
Philippi - Power Install System 250
Security block for 5 vehicle fuses or circuit breaker 1610. Structural resilience Total 30 a, max. Fuse 20 A.
Dimensions L 119 x W 40 x H 50 mm
The installation of high-current components such as the main switch and fuses is a space and time-consuming task, since the connection of the individual components due to mechanical differences can often only be established with flexible lines. Our newly developed main distribution system saves a lot of space, time and money. It also increases security because all connections are connected to each other via suitable copper taps. The central components are the mechanically switchable (EBH 250) or the electrically remote-controllable battery switch (FBR/TSA/FBC 265). The subsequent protection can take place with the strip protection holder ESH or the EBF bolt fuse holders.
At the input and output of the battery switch switches, a safety block ESF can be installed to supply measuring lines and consumers such as bilge pump, charger or heating with a permanent plus. The current resilience of the system is 250 A and is suitable for DC 12 V and 24 V.
By combining several components, a compact main power distribution for starter and consumer battery can be set up, which can also be supplemented with an emergency switch at the start of the engine via the consumer battery. Alternatively, a loading relay can also be used. Mechanical or remote control main switch (FBA / TSA / FBC) can be used. Security blocks can be attached to the main switch outputs to secure the main lines. Small safety blocks to secure permanent plus consumers can also be supplemented on the side. The connection is made with the appropriate connecting taps.
Security block for 5 vehicle fuses or circuit breaker 1610. Structural resilience Total 30 a, max. Fuse 20 A.
Dimensions L 119 x W 40 x H 50 mm
The installation of high-current components such as the main switch and fuses is a space and time-consuming task, since the connection of the individual components due to mechanical differences can often only be established with flexible lines. Our newly developed main distribution system saves a lot of space, time and money. It also increases security because all connections are connected to each other via suitable copper taps. The central components are the mechanically switchable (EBH 250) or the electrically remote-controllable battery switch (FBR/TSA/FBC 265). The subsequent protection can take place with the strip protection holder ESH or the EBF bolt fuse holders.
At the input and output of the battery switch switches, a safety block ESF can be installed to supply measuring lines and consumers such as bilge pump, charger or heating with a permanent plus. The current resilience of the system is 250 A and is suitable for DC 12 V and 24 V.
By combining several components, a compact main power distribution for starter and consumer battery can be set up, which can also be supplemented with an emergency switch at the start of the engine via the consumer battery. Alternatively, a loading relay can also be used. Mechanical or remote control main switch (FBA / TSA / FBC) can be used. Security blocks can be attached to the main switch outputs to secure the main lines. Small safety blocks to secure permanent plus consumers can also be supplemented on the side. The connection is made with the appropriate connecting taps.