Fenders

The valve fits for the cable lichen fenders offered by us.The adapter also fits for Talamax, Danfender and MajoniThe Majoni valve is crucial, this can be recognized by the fact that an M3 thread is located on the Fender side.

This adapter has a suitable connection for a bicycle air pump and a car tire valve pump.With the help of a bicycle air pump or a car tire valve pump and this adapter, fenders are easily inflated with a so-called Majoni valve (M3 thread on the fender).The adapter fits Fender of the brand rope lichen, Talamax, Danfender and Majoni.!! This adapter is not suitable for balls or fenders with a needle valve !!If the thread of the valve is damaged, you will also find the right replacement valve in our range.

Particularly strong execution, strong eyelets, proven valves.Basic color: blue. Black caps.Ø approx. 240 mm x length approx. 700 mmThe fenders are not delivered inflated!To inflate the fenders, only suitable pumps with a suitable connection for the valve, e.g. a fender pumps with a suitable connection or an adapter for e.g. bicycle and car pumps may be used.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Ready-made Fenderleine, with spliced

Fixed and finished fender leash, with a stuffed eyelet for pulling through.Spiral braided birotex, color blueØ 8 mm x length approx. 1.5 m

Ready-made Fenderleine, with spliced

Particularly strong execution, strong eyes, proven valves.Color: white. Black Caps.Ø 150 mm x length 580 mmThe fenders are delivered not inflated!Only suitable pumps with a suitable connection for the valve, e.g. a fender pump with a suitable connection or an adapter for e.g. bicycle and car pumps, may be used to inflate the fenders.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Ready-made Fenderleine, with spliced

Can be used as fenders and also as sit-on cushions. Non-porous foam (does not absorb water) inside a nylon cover. Just unzip to remove the cover. Fender cushions are supplied with a 3 metre fender line

Particularly strong execution, strong eyes, proven valves.Color: white. Black Caps.Ø approximately 210 mm x 620 mm length aboutThe fenders are delivered not inflated!Only suitable pumps with a suitable connection for the valve, e.g. a fender pump with a suitable connection or an adapter for e.g. bicycle and car pumps, may be used to inflate the fenders.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Particularly strong execution, strong eyes, proven valves.Color: white. Black Caps.Ø 240 mm x 700 mm length aboutThe fenders are delivered not inflated!Only suitable pumps with a suitable connection for the valve, e.g. a fender pump with a suitable connection or an adapter for e.g. bicycle and car pumps, may be used to inflate the fenders.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Particularly strong execution, strong eyelets, proven valves.Basic color: blue. Black caps.Ø approx. 210 mm x length approx. 620 mmThe fenders are not delivered inflated!To inflate the fenders, only suitable pumps with a suitable connection for the valve, e.g. a fender pumps with a suitable connection or an adapter for e.g. bicycle and car pumps may be used.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Particularly strong execution, strong eyelets, proven valves.Basic color: blue. Black caps.Ø approx. 150 mm x length approx. 580 mmThe fenders are not delivered inflated!To inflate the fenders, only suitable pumps with a suitable connection for the valve, e.g. a fender pumps with a suitable connection or an adapter for e.g. bicycle and car pumps may be used.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Particularly strong execution, strong eyelets, proven valves.Basic color: white. Black caps.Ø approx. 120 mm x length approx. 450 mmThe fenders are not delivered inflated!To inflate the fenders, only suitable pumps with a suitable connection for the valve, e.g. a fender pumps with a suitable connection or an adapter for e.g. bicycle and car pumps may be used.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

Particularly strong execution, strong eyes, proven valves.Color: blue. Black Caps.Ø 120 mm x length 450 mmThe fenders are delivered not inflated!Only suitable pumps with a suitable connection for the valve, e.g. a fender pump with a suitable connection or an adapter for e.g. bicycle and car pumps, may be used to inflate the fenders.Pumps for e.g. balls, air mattresses etc. are unsuitable and may damage the valve, which leads to leaks.

A needle pump with a double stroke for pumping balls and fenders with a ball valve.!! This pump is not suitable for balls or fenders with a valve with (M3) thread !!If the pump is not used, the needle for pumping can be accommodated safely and in a space -saving manner in the pump.Basic color: blackØ 25 mm140 mm piston length205 mm total lengthincluding needle

The seaEQ fender mat is attached to the railing with the fender lines. Due to the incorporated rubber mat, this boat fender has a good own weight to be placed well on the hull. At the same time, the cushion fender is very thin and easy to store and is also rollable. The boat fender protects your boat from unnecessary damage and scratch marks, e.g. by pendulous fenders. You can use the flat fender wherever boat fenders can move on the hull and thus scratch or scuff marks on the hull can occur. The lightweight, tear-resistant polyester fabric provides a long life for the flat fender and offers little resistance to the fenders. The PU-coated inside FPM protects the hull of your boat. The 4mm cellular rubber core provides protection and flexibility.There are 3 different colors of seaEQ fender protection mat: white, deep-blue, black.Variants: FPM 2100*500, dimension: approx. 2000 x 500 x 4mm.Features:Your yacht is protected over a large area.Optimal damping by cellular rubber core.Can also be used as a windbreak.Great optics.Folded, or rolled up, easy to store.Material:The seaEQ-FPM is made of lightweight, tear-resistant polyester fabric. The side facing the yacht is coated. The core is made of cellular rubber. The seaEQ-Fender-Protection-Mat is completely sewn around with PP-straps. The fastening eyelets are firmly sewn.There are no metal objects on all seaEQ FPM-FENDERSystems. seaEQ-FENDERSystems are easy to handle and flexible to use. To keep the colors longer, after the season store all fender systems protected from sunlight. Made in Germany"

Cushion fenders from seaEQ protect your boat from damage during docking and casting off. At the orange side straps, the fender cushions can be additionally fixed to the cleats by a rope to prevent the flat fender from being distorted when docking and casting off. The fender cushion protects your boat at the quay and when you are close alongside other boats the boat fender provides full length protection.You use the seaEQ cushion fender when you enter a foreign box, when a large area of your boat needs to be protected, when things are really tight, or when you are lying in a pack. The long fender from seaEQ, the right choice.The heavy, highly tear-resistant polyester fabric ensures a long life of the flat fender. The 27mm thick and very strong PE foam core provides contact cushioning on contact. The puncture-resistant, fabric-reinforced protective mat provides additional safety for your boat.The seaEQ long fender is available in 4 variants and 3 colors.Variants: LF 2100 XL, (2100 x 550 x 27 mm). The BIG one protects your boat on more than 2 meters length. Weight: approx. 4,8 kg.LF 2100, (2100 x 400 x 27 mm). The LONG one protects your boat on more than 2 meters length. Weight: approx. 3.4 kg. LF 1400, (1400 x 400 x 27 mm). The COMPACT protects your boat on 1.40 meters length. Weight: approx. 2,4 kg.LF 700, (700 x 400 x 40mm). The VERSATILE mono protects your boat on 0,7 meter length. Weight: approx. 1.4 kg.Features:Integrated PROTECTOR MAT.Your boat is protected over a large area.And if it is tight in the box, there is always room for the seaEQ long fender.Foldable and easy to store due to multi-segment design.Folded, the flat fender can also be used as a pack (package fender).Material:The cushion fender is made of highly tear-resistant, heavy polyester fabric. The side facing the boat is PVC coated. The core is made of a special high-strength PE foam and a puncture-resistant mat.The seaEQ long fender is completely sewn around with polyester straps for stability. The fastening eyelets are firmly sewn.To preserve colors longer, store all fender systems out of sunlight after the season. There are no metal objects on any of seaEQ's LF-FENDER systems.seaEQ fender systems are easy to handle and flexible to use.Made in Germany"

The BF 2/38 bow fender is foldable and protects your boat from damage, e.g. when entering the berth. At the side straps the bow fender can be easily fixed by a line. The boat fender for the bow also protects a stronger impact through its integrated Protector mats. The bow fender also protects against damage from a dropping anchor, or an anchor that is being lifted. A folded boat fender is easy to store. The boat fender for the bow has a very small pack size and is very light.The heavy, highly tear-resistant polyester fabric ensures a long service life of the fender. The strong and firm PE core provides contact damping on contact, reinforced with Protector mats.The seaEQ bow fender is available in 2 sizes and 3 colors. Variants: BF 2/38 (approx. 250mm leg dimension, approx. 400mm high).BF 2/68 (approx. 250mm leg dimension, approx. 700mm high)colors:black, deep-blue , shark-greyFeatures:Your boat is excellently protected. Easy to install.Optimal bow protection.Especially safe due to PE and PVC reinforcement.Space-saving because foldable.The seaEQ bowfender is made of high-strength, heavy polyester fabric. The side facing the yacht is PVC coated. The core consists of a special, high-strength PE foam, through a PVC reinforcement puncture-proof. The seaEQ boat fender for the bow is completely sewn around with PP straps for stability.To keep the colors longer, after the season store all fender systems protected from sunlight. There are no metal objects on all seaEQ fender systems.seaEQ fender systems are easy to handle and flexible to use.All materials come from Europe.Made in Germany"

The seaEQ dock fenders protect your boat from damage. When contact is made with the dock, the contact is significantly dampened by the dock fender, preventing damage to the boat. When in contact with the boat fender, the boat can SLIDE and is NOT STOPPED. This keeps you manoeuvrable. The intricate internal construction of the DF boat fender, provides optimum protection when in contact with the hull and also absorbs hard impacts. The seaEQ-DF fender stay is mounted on the jetty, on the pier (fastening material not included). There are openings on the back of the seaEQ-Dock fender which allow flexible fastening with screws or e.g. cable ties. The screws disappear behind the straps of the dock fender.Order an additional mounting set? You will find everything you need under the heading Accessories/Spare Parts! Variants: (LxWxD): DF 40/10 400*100*30mmVariants:DF 40/10 400*100*30mmDF 80/10 800*100*30mmDF 110/10 1100*100*30mmDF A 20/10 200*100*30mm (Dock Fender Angle, corner variant)DF B 110/20 1100*200*80mm (Dock Fender Bow, bow)DF M 110/60 1100*600*30mm (Dock Fender Mat, Matte)Colours:blackdeep-blueshark-greyMaterial:The stay fender is made of a closed cell polyethylene foam with synthetic fibre coating, the back is made of a heavy PVC.Features:Easy installation (fixing material not included).Optimal protection for your boat and yacht.The boat is NOT STOPPED, it GLIDES and REMAINS CONTROLABLE.The mooring can be completely secured, providing perfect protection for the hull of the boat.Mounting tips:There are various openings on the fenders of the seaEQ-DF series, which are covered by a circumferential webbing. To mount, lift the webbing, mark the places where you want to attach the DF and pre-drill the holes. Now screw the fender to the stay at the desired location. Use aluminium rings / washers to prevent the screws from slipping (see DF assembly set). After screwing, press the webbing down. Now the screws are covered and your boat is protected.If you want to mount your fender flexibly or if it is not allowed to screw it down at the jetty in your harbour, the fenders of the DF series can also be mounted with cable ties. All fenders are provided with double holes for this purpose. Ask your harbour master before mounting. Under the heading Accessories / Spare parts you will find seaEQ mounting sets for fixed or flexible mounting.To preserve the colours for longer, store the fender out of sunlight after the season. seaEQ fender systems are easy to handle, flexible to use and extremely robust.Made in Germany."