LED mit Stecksockel

MARINE LED- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- prevents Integrated Voltage Regulation '' burn '' and guarantees long service life- The Leuchittel with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor. 1 illuminant with 15 SMD LED.Suitable for all applications where a large angle is needed.suitable for combination with the bayonet socket adapters L18XX for many applications on board.Series: 15er SMD SpotLuminous flux output typ .: 90 lumensColor temperature: warm white (3000 Kelvin)CRI:> 80Rated / rated life: up to 50,000 hLumen maintenance: 0.7Angle: 300 °Socket type (standard designation): G4Consumption: 0.8 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelySubstitutes: 15 W halogen spotlightDimmable: YesDimensions: Ø 13 mm x 34.7 mmWeight: 4 gWeight in the Blister: 14 gSwitching cycles:> 25,000Color Consistency: SDCM <4 (Standard Deviation of Color Matching)Energy efficiency class: A +Delay: none (<1 sec.)Power Factor: 0.8* 11 W as shown in Table 6 of the EU Regulation 244/2009Consumption in W was for decades as a benchmark for lamps alternatives.However, the prescribed formulas for determining equivalence do not necessarily reflect the realistic replacement again.The subjective perception of brightness of an LED lamp is highly dependent on the positioning and type of light.Most LED lamps emit light mainly in one direction.As a result, lamps are felt with a low equivalent value, according to the EU regulations as significantly brighter.

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 9 SMD LED,Light current tax type: 63 lumensColor temperature: warm white (approx. 2900 Kelvin)Cri:> 80Rated /nominal life duration: up to 50,000 hLight stream maintenance: 0.7Ray angle: 125 °Base type (standard designation): G4Consumption: 0.5 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: approx. 5 - 10W halogen pencil lamp*Dimmable: yesDimensions: Ø 30mmWeight: 4 gWeight in the blister: 14 gSchlag cycles:> 25,000Color consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class [A-G]: EEprel registration number 2019/2015: 760267Weighted consumption: 1 kWh / 1000 hDelay of switching: no (<1 sec.)Power factor: 0.8

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.Series 1 lamp with 12 SMD pen baseArticle number LED12STG4LEAN code 4260106547199Light current tax type 65 lumensColor temperature warm white (approx. 2700 Kelvin)CRI> 80Rated /nominal life of up to 30,000 hLight current maintenance 0.7Ray angle 300 °Base type (standard designation) G4Consumption 0.6 wattsInput voltage 10-30V DC / 10-18V AC at 50/60 Hz EffectiveReplaces approx. 5-10W halogen pen lamp*Dimmable yesDimensions Ø 9.4mm x 36.5 mmWeight 2 gWeight in the blister 12 gSchlag cycles> 25,000Color consistency SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class [A-G]: FEPREL registration number 2019/2015: 762123Delay of switching no (<1Sec.)Power factor 0.8*7 W in accordance with Table 6 of the EU Regulation 244/2009The consumption in Walt was considered a comparative value for lamp alternatives for decades. However, the given formulas for equivalent determination do not necessarily reflect the realistic replacement. The subjective perception of the brightness of an LED lamp depends heavily on the positioning and type of light. Most LED lamps mainly emit the light in one direction. As a result, lamps with a low equivalence value are perceived as much brighter according to the EU regulations.

MARINE LED- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- prevents Integrated Voltage Regulation '' burn '' and guarantees long service life- The Leuchittel with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.1 Lamp 16 SMD-LED (red 6x, 10x warm white). Ideal for reading maps in marine applications.The switching of the light color is performed by repeatedly turning on and off in direct succession.Series: 16er SMD moduleLuminous flux output typ .: 150 lumens ww / 30 lumens redColor temperature: warm white (3000 Kelvin) / red 623 NmCRI:> 80 at 3000KRated / rated life: up to 30,000 hLumen maintenance: 0.7Angle: 125 °Socket type (standard designation): G4Consumption: 1.8 W ww / 1 watt redInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelyReplaces: 16 W halogen pin lamp at 3000 K *Dimmable: Yes (PWM dimming)Dimensions: 33 mm (+9 mm pins)Weight: 5 gWeight in the Blister: 17 gSwitching cycles:> 25,000Color Consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class: A +Delay: none (<1 sec.)Power Factor: 0.8Function: The module starts with rot.Wenn within one second, the voltage is disconnected and re-applied, the module switches to warm white.* Special product according to the EU Regulation 1194/2012Applications: night vision for reading maps in the marine sectorNote: Not suitable for household room illumination!

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 10 SMD LED, through the compact design ideal for converting stems, such as model "Mallorca" (Art.No. 69125).Series: 10 SMD moduleLight current tax type.: 160 lumensColor temperature warm white (approx. 3000 Kelvin)Cri:> 83Rated /nominal life duration: up to 50,000 hLight stream maintenance: 0.7Ray angle: 125 °Base type (standard designation): G4Consumption: 1.7 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: approx. 20-25W halogen pencil lamp*Dimmable: yesDimensions: Ø 30 mmWeight: 5 gWeight in the blister: 15 gSchlag cycles:> 25,000Delay of switching: no (<1 sec.)Color consistency: SDCM <4Energy efficiency class [A-G]: FEPREL registration number 2019/2015: 698995Power factor: 0.817 W in accordance with Table 6 of the EU Regulation 244/2009The consumption in Walt was considered a comparative value for lamp alternatives for decades. However, the given formulas for equivalent determination do not necessarily reflect the realistic replacement. The subjective perception of the brightness of an LED lamp depends heavily on the positioning and type of light. Most LED lamps mainly emit the light in one direction. As a result, lamps with a low equivalence value are perceived as much brighter according to the EU regulations.

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 18 SMD LED. Particularly compact design, therefore well suited for all lights with a flat open umbrella.In conjunction with the Bayonett socker adapters L18 XX, suitable for many applications on board.Series: 18 SMD Abbey BockLight current tax type.: 200 lumensColor temperature: warm white (approx. 3000 Kelvin)Cri:> 80Lifespan: up to 50,000 hRated /nominal life: 0.7Ray angle: 300 °Base type: G4Consumption: 1.9 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: approx. 25 - 30 w halogen pen lamp*Dimmable: yesDimensions: Ø 19 mm x 34 mmWeight: 7 gWeight in the blister: 19 gSchlag cycles:> 25,000Color consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class [A-G]: FEprel registration number 2019/2015: 788260Delay of switching: no (<1 sec.)Power factor: 0.8*21 W in accordance with Table 6 of the EU Regulation 244/2009The consumption in Walt was considered a comparative value for lamp alternatives for decades.However, the given formulas for equivalent determination do not necessarily reflect the realistic replacement.The subjective perception of the brightness of an LED lamp depends heavily on the positioning and type of light.Most LED lamps mainly emit the light in one direction.As a result, lamps with a low equivalence value are perceived as much brighter according to the EU regulations.

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 10 SMD LED, connections at the back, suitable for many reading lightsSeries: 10 SMD moduleLight current tax type.: 160 lumensColor temperature: warm white (approx. 3000 Kelvin)CRI: 83Rated /nominal life duration: up to 30,000 hLight stream maintenance: 0.7Ray angle: 125 °Base type (standard designation): GZ4Consumption: 1.7 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: approx. 20-25W halogen pencil lamp*Dimmable: yesDimensions: Ø 30 mm/ 14.5 mm pinsWeight: 5 gWeight in the blister: 15 gSchlag cycles:> 25,000Delay of switching: no (<1 sec.)Color consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class [A-G]: FEprel registration number 2019/2015: 760335Power factor: 0.8*17 W in accordance with Table 6 of the EU Regulation 244/2009The consumption in Walt was considered a comparative value for lamp alternatives for decades.However, the given formulas for equivalent determination do not necessarily reflect the realistic replacement.The subjective perception of the brightness of an LED lamp depends heavily on the positioning and type of light.Most LED lamps mainly emit the light in one direction.As a result, lamps with a low equivalence value are perceived as much brighter according to the EU regulations.

Marine LED- Very low energy requirement- Pleasant warm and white light color- The light color corresponds to conventional incandescent lamps- Large input voltage area, suitable for 12 and 24 V on -board nets- insensitive to tension tips (through Lima, charger, etc.)- Integrated voltage control '' burns' 'burn' and guarantees long service life- The lamps with integrated voltage control work regardless of the polarity- In conjunction with an electronic dimmer (pulse width modulation), the LEDs are dimmable- Due to constant technical development, we reserve the right to deliver deviating successor items without prior notice in design and technical data.1 lamp with 9 SMD LED (6x red, 10x warm white). Ideal for reading card at naval applications.The light color is switched through repeated switching on and off in a direct result.Series: 16 SMD moduleLight current tax type.: 80 lumen ww / 20 lumens redColor temperature: warm white (approx. 3000 Kelvin) / red 623 nmCRI:> 80 at 3000KRated /nominal life duration: up to 30,000 hLight stream maintenance: 0.7Ray angle: 125 °Base type (standard designation): G4Consumption: 1.4 watts WW / 0.5 watts redInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz EffectiveReplaced: 10 - 15 W halogenic pencil lampDimmable: yes (PWM dimension)Dimensions: 33 mm (+8.5 mm pins)Weight: 4 gWeight in the blister: 16 gSchlag cycles:> 25,000Color consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class [A-G]: FEPREL registration number 2019/2015: 766283Delay of switching: no (<1 sec.)Power factor: 0.8Function: The module starts with red. If the voltage is separated and created within a second, the module switches to warm white.*Special product according to the EU regulation 1194/2012Areas of application: night vision for card reading in the naval areaNote: Not suitable for room lighting in the household!

MARINE LED- Very low power consumption- Pleasant warm white light color- The light color corresponds to conventional incandescent lamps- Large input voltage range, suitable for 12 and 24 V systems- Insensitive against voltage spikes (by dynamo, charger, etc.)- prevents Integrated Voltage Regulation '' burn '' and guarantees long service life- The Leuchittel with integrated power control function independently of the polarity- In connection with an electronic dimmer (pulse width modulation), the LED can be dimmed- Due to continuous development we reserve the right without notice in design and specifications to supply different items successor.1 illuminant with 18 SMD LED. Suitable for all applications where a large angle is needed.In conjunction with the bayonet socket adapters L18 xx suitable for many applications on board.Series: 18er SMD pin baseLuminous flux output typ .: 252 lumensColor temperature: warm white (3000 Kelvin)CRI:> 80Life: up to 50,000 hRated / rated life: 0.7Angle: 300 °Socket Type: G4Consumption: 2.3 wattsInput voltage: 10 - 30 V DC / 10 - 18 V AC at 50/60 Hz effectivelyReplaces: 35 W halogen bulbs capsule *Dimmable: YesDimensions: Ø 18 mm x 36.5 mmWeight: 12 gWeight in blister: 23 gSwitching cycles:> 25,000Color Consistency: SDCM <7 (Standard Deviation of Color Matching)Energy efficiency class: A +Delay: none (<1 sec.)Power Factor: 0.8* 21 W as shown in Table 6 of the EU Regulation 244/2009Consumption in W was for decades as a benchmark for lamps alternatives.However, the prescribed formulas for determining equivalence do not necessarily reflect the realistic replacement again.The subjective perception of brightness of an LED lamp is highly dependent on the positioning and type of light.Most LED lamps emit light mainly in one direction.As a result, lamps are felt with a low equivalent value, according to the EU regulations as significantly brighter.

Energy -saving Power LED lamp Ø 30mm with G4 pen base for installation spotlights with side G4 pen base. The low heat development enables usealso in heat -sensitive areas.Constant brightness for different supply voltages 9-28 V DC, 1.6W, light color warm white approx. 3000 ° K

High -efficient LED lamp in the design of an ordinary MR11 spot for networked applications, e.g. huts, tent, motorhome etc. Due to its very low energy consumption, it can be operated for 16 hours with a 5W solar module and a small 4Ah battery. In this way, the total cost of the system can be reduced to a minimum. The light output is comparable to a 12W halogen spot with a long lifespan of more than 40,000 hours. In addition, the lamp is now available as a G4 without housing, especially for use in motorhomes and caravans.Product features: 1 x high-performance LED, 12 VDC, 1.2 W, 100 lm neutral white, 4500,1 x high -performance LED Cree, 100lm, 12VDC, Daylight White, 4500K, G4Article No.: 360094Manufacturer: PhaesunProduct weight: 0.01 kgWeight including packaging: 0.01 kgDimensions: 20 x 20 x 0 mm (L x W x H)