Hoppecke AGMs

Enables the use of standard polar terminal (DIN), for connections with M8 interior thread, the thread depth should be at least 15mm

Allows the use of standard pole terminals (DIN), for connections with M8 internal thread.

Checked for on-board supply systems and engine starter applications by the Germanic Lloyd/GL also in industrial offshore use of professional shipping.Battery manufactured with the latest hop corner AGM + Hoppecke ESS technology, to maximize the cycle strength and extension of the useful duration.Due to ESS technology, improved voltage behavior is achieved, even under difficult operating conditions such as increased ambient temperature or cyclical stress due to improved thermal and ionic conductivity.ESS technology also improves the load acceptance when loading.Up to 800 charging cycles (at 80 % discharge depth).In stand-by mode, a service life of more than 12 years can be reached.Battery acid is fixed in the fleece.Assembly of the batteries is possible.Fully insulated, corrosion-resistant M8 cell and block connectors for row or parallel circuit are included (please add the assembly sketch and current load on the order).Due to the valve -controlled closure system, no refill of distilled water is required.On request, AGM increased security by connecting the integrated central gassing to remove gases during overloading/device defect via an external hose system.Storage time without recharging (temperature -dependent).Lade technology IU - IMAX characteristic line without limitation or iuou characteristicConservation voltage: 2.25 V / cellStrong ankly voltage: 2.35 - 2.40 V / cell, limited in timeTypical charging current: 1 x i10 (10a per 100Ah)There is no dangerous goods for air and sea transport, dangerous goods exemption confirmation.Made on Hoppecke production facilities and certified according to ISO 9001: 2008 /ISO 14001.Approval from GL, Telekom, Gost, Aramco and much more.Technical data see downloads below

Geprüft für Bordversorgungssysteme und Motorstarteranwendungen durch den germanischen Lloyd/GL auch im industriellen Offshore-Einsatz der Berufsschifffahrt.Batterie gefertigt mit neuster HOPPECKE AGM + HOPPECKE ESS Technologie, zur Maximierung der Zyklenfestigkeit und Verlängerung der BrauchbarkeitsdauerDurch die ESS-Technologie wird ein verbessertes Spannungsverhalten, auch unter erschwerten Betriebsbedingungen wie erhöhte Umgebungstemperatur oder zyklischer Belastung durch eine verbesserte thermische- und ionische Leitfähigkeit erreicht.ESS-Technologie verbessert ebenfalls die Ladungsannahme bei Starkladung.Bis zu 800 Ladezyklen (bei 80 % Entladungstiefe).Im Stand-by-Modus ist eine Gebrauchsdauer von mehr als 12 Jahren erreichbar.Batteriesäure ist auslaufsicher im Vlies fixiert.Eine Montage der Batterien ist stehend oder liegend möglich.Vollisolierte, korrosionsfeste M8 Zellen- und Blockverbinder für Reihen- oder Parallelschaltung sind im Lieferumfang enthalten (bitte Montageskizze und Strombelastung der Bestellung beifügen).Durch das ventilgeregelte Verschlußsystem ist kein Nachfüllen von des. Wasser erforderlich.Auf Wunsch erhöhte AGM Sicherheit durch Anschlusses der integrierten Zentralentgasung zur Abfuhr von Gasen bei Überladung/Gerätedefekt über ein externes Schlauchsystem. Lange Lagerzeit ohne Nachladung (Temperaturabhängig).Ladetechnik IU – Kennlinie Imax ohne Begrenzung oder IUoU KennlinieLadeerhaltungsspannung : 2,25 V / Zelle Starkladespannung : 2,35 - 2,40 V / Zelle, zeitlich begrenztLadestrom typisch : 1 x I10 (10A je 100Ah)Kein Gefahrgut für Luft- und Seetransport, Gefahrgutfreistellungsbestätigung liegt vor.Hergestellt auf HOPPECKE Produktionsanlagen und zertifiziert nach ISO 9001:2008 /ISO 14001.Zulassungen vom GL, Telekom, GOST, ARAMCO uvm.Technische Daten siehe unten bei Download

The Hoppecke Grid | Power VR X (FT) battery is based on the use of grid plates and a glass fiber fiber as a separator in which the electrolyte is fixed. The innovative eating technology, the compact design and the best ergonomics through the rear handles ensure optimal and economic use.Hoppecke Grid | Power VR X (FT) Batteries combine maximum energy with minimal space requirements and are therefore used especially in telecommunications and UPS applications. The standardized dimensions as well as the option on central degassing enable high compatibility and simple assembly, especially in the area of ETSI and 23 “cupboards. The Hoppecke Grid | Thanks to the UL94 V-0 certification, Power VR X (FT) guarantees maximum security even under demanding operating conditions.

Checked for on-board supply systems and engine starter applications by the Germanic Lloyd/GL also in industrial offshore use of professional shipping.Battery manufactured with the latest hop corner AGM + Hoppecke ESS technology, to maximize the cycle strength and extension of the useful duration.Due to ESS technology, improved voltage behavior is achieved, even under difficult operating conditions such as increased ambient temperature or cyclical stress due to improved thermal and ionic conductivity.ESS technology also improves the load acceptance when loading.Up to 800 charging cycles (at 80 % discharge depth).In stand-by mode, a service life of more than 12 years can be reached.Battery acid is fixed in the fleece.Assembly of the batteries is possible.Fully insulated, corrosion-resistant M8 cell and block connectors for row or parallel circuit are included (please add the assembly sketch and current load on the order).Due to the valve -controlled closure system, no refill of the. Water is required.On request, AGM increased security by connecting the integrated central gassing to remove gases during overloading/device defect via an external hose system.Long storage time without recharging (temperature -dependent).Lade technology IU - IMAX characteristic line without limitation or iuou characteristicConservation voltage: 2.25 V / cellStrong ankly voltage: 2.35 - 2.40 V / cell, limited in timeTypical charging current: 1 x i10 (10a per 100Ah)There is no dangerous goods for air and sea transport, dangerous goods exemption confirmation.Made on Hoppecke production facilities and certified according to ISO 9001: 2008 /ISO 14001.Approval from GL, Telekom, Gost, Aramco and much more.Teschnische data below at download