Steca

DCL Voltage Converter The DCL extends the functions on of the DCS by adding excess energy management functions on did Provides usable energy did would normally be wasted Because The battery can not accept the extra solar energy. With DCL it is possible to charge a second battery with excess energy. This is Widely used in mobile homes and boats Which oft have a battery for the solar system and a second battery for starting the engine. Another typical application is to power a small fan for air exchange on a boat powered only with excess energy. Only your imagination limits the number of possible applications. CXM Remote Display Phocos CXM can be used in combination with Phocos CXN series charge controllers via interface connector. Phocos CXM remote display is designed to display panel current, load current and battery voltage of your PV system as true values

USB cable for PC, incl. FTDI chip, 1.8m, core end free for MPPT6000-M, RS232 +/- 5VPart No: 391163Manufacturer: StecaProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 0 x 0 x 0 mm (L x B x H) USB cable for PC, incl. FTDI chip, 1.8m, core end free for MPPT6000-M, RS232 +/- 5VPart No: 391163Manufacturer: StecaProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 0 x 0 x 0 mm (L x B x H)

The Steca Tarom MPPT 6000 solar loaders sets new standards in the area of the MPPT loader. Excellent efficiency together with unique security features make it a universal top loader. Two inputs can be used in parallel or separately. Different module arrangements can be combined flexibly and operated with a loader. With an input voltage of up to 200VDC, all solar modules can be connected differently.Product characteristics: line compensation through sensitors, robust metal housing, two independent maximum Power Point Tracker (MPP tracker), voltage and power control, PWM control, temperature compensation, monthly maintenance charging, two strings, two strings adjustable, battery tension: gel / liquid, electronic protective functions: Overcharging, deep discharge, discolour protection of module and battery, automatic electronic backup, idle protection without battery, return current protection at night, overload and overload protection, PE connection, earth connection monitoring, ads: Multifunctional LCD display with backlight, configuration via display unit, options : External temperature sensor, connection for battery tensioning knife cable, certificates: CE-compliant, raw-compliant, made in Germany, developed in Germany, manufactured under ISO 9001 and ISO 14001,12V/24V/48V/, nominal output 850W/1700W/3400W, module current 2x30a, two independent MPP string entrancesArticle No.: 321161Manufacturer: StecaProduct weight: 6.30 kgWeight including packaging: 7.30 kgDimensions: 295 x 125 x 335 mm (L x W x H)

The Steca Tarom MPPT 6000 Solar Charge Controller sets new standards in the field of MPPT charge controller. Excellent efficiency along with unique security features make it a universal tip charge controller. Two inputs can be used simultaneously or separately. Different module configurations can be flexibly combined and operated with a charge controller. With an input voltage of up to 200VDC all the solar modules can be interconnected differently.Product features: line compensation through sensor cable, robust metal housing, two independent Maximum Power Point Tracker (MPP tracker), voltage and current control, PWM control, temperature compensation Monthly maintenance charge, two strings, charge voltages adjustable Battery Type: gel / liquid, electronic protection: overcharge protection, discharge protection, reverse polarity protection of the module and battery Automatic electronic fuse, Open circuit protection without battery reverse current protection at night Overtemperature and overload protection, PE terminal, earth fault, displays: multifunction graphical LCD display with backlighting, configuration via display unit options : External temperature sensor, connection for battery voltage meter cable Certificates: CE compliant, RoHS compliant, Made in Germany, developed in Germany Manufactured according to ISO 9001 and ISO 14001, 12V / 24V / 36 / 48V / 60V, connection power 850W / 1700W / 2550W / 3400W / 4250W, module current 2x30A, 2 independent string inputs, RS232, RS485 StecaLink bus, SD card, AUX, Temp. And Bat. sensorPart No: 321229Manufacturer: StecaProduct Weight: 6.60 kgWeight incl. Packaging: 6.60 kgDimensions: 295 x 125 x 335 mm (L x B x H)

1200 W, 12 VDC, 230 VAC / 40 - 65 Hz Hz, charging current 40 A PV / 20 a grid / 30 a transfer, 100 VOC, self -consumption 4 W / 17 W, sinus voltage, electronic protective function, screw clamp PV / grid 8 mm², Connection BAT M6 - 25 mm², air cooling, LCD, programmable, option (WIFI), IP21

Electricity sensor for Steca Tarom Mppt 6000-M, 400A, 12/248VArticle No.: 391129Manufacturer: StecaProduct weight: 0.25 kgWeight including packaging: 0.25 kgDimensions: 140 x 80 x 28 mm (L x W x H)Electricity sensor for Steca Tarom Mppt 6000-M, 400A, 12/248VArticle No.: 391129Manufacturer: StecaProduct weight: 0.25 kgWeight including packaging: 0.25 kgDimensions: 140 x 80 x 28 mm (L x W x H)

USB cable for PC, ´Al. FTDI chip, 1.8m, veiling offfen, for Tarom 4545 and 4545-48, TTL 0-3.3VArticle No.: 390824Manufacturer: StecaProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 0 x 0 x 0 mm (L x W x H)USB cable for PC, ´Al. FTDI chip, 1.8m, veiling offfen, for Tarom 4545 and 4545-48, TTL 0-3.3VArticle No.: 390824Manufacturer: StecaProduct weight: 0.30 kgWeight including packaging: 0.30 kgDimensions: 0 x 0 x 0 mm (L x W x H)

Birne, 210 lm, 2 W, 12/24 VDC, warm weiß, E27, IP50

USB cable for PC, incl. FTDI chip, 1.8m, RJ45 connector, for Power Tarom, TTL 0-5VPart No: 390334Manufacturer: StecaProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 1800 x 0 x 0 mm (L x B x H) USB cable for PC, incl. FTDI chip, 1.8m, RJ45 connector, for Power Tarom, TTL 0-5VPart No: 390334Manufacturer: StecaProduct Weight: 0.30 kgWeight incl. Packaging: 0.30 kgDimensions: 1800 x 0 x 0 mm (L x B x H)