Superwind

The stop switch serves to brake the wind generator if it is not to be operated or if, as with assembly, the start of the rotor is to be prevented.When used on sailing yachts, the installation of the stop switch is strongly recommended in order to be able to switch off the super wind at sea in extremely heavy weather. Excessive water, striking linen etc. could get into the running rotor. In such situations, the restricted movement ability on board also increases the risk of violating the current rotor.

The Superwind 350 is a small wind generator for professional use, the autonomously even under extreme conditions and operates unattended and provides reliable energy. Ideal applications for the wind turbine 350 are e.g. the supply of sailing yachts, chalets, mobile homes or cottages.The Superwind 350 is supplied with new ultra-quiet "Silent Power" rotor blades. These optimized rotor blades have a lower by 10 dB (A) noise compared to previous smallpox. The audible impression corresponding to about half volume.Technical specifications:-Nennleistung 350 W-Nennwindgeschwindigkeit 12.5 m / s-Einschaltwindgeschwindigkeit 3.5 m / s-Abschaltwindgeschwindigkeit no-Rotordurchmesser 1.20 m-Blattzahl 3-Rotorblattmaterial CFK-Speed

Charge regulator Marine CRM for SUPER WIND 350The CRM charge controllers are particularly suitable for use in the nautical sector. It is completely sealed, thereby effectively protected against moisture. The regulator has two separate outputs, the two separate for charge battery packs may be used (e.g., service and starter battery).Voltage rating of 12 V-Ladeschluss voltage (factory setting) 14.2 V-Ladeschluss voltage (range) between 11.5 17.0 V DCMax. Stream for load resistors 40 A

The mast set is designed for yachts for the easy assembly of the SuperWind generator and includes all the necessary fastening parts. The mast base is fed and is suitable for assembly on the mirror and on deck. Because of the complex and expensive shipping, the mast set does not include the actual mast tube and the pipes for the two struts. These pipes have standard dimensions and can be easily obtained anywhere in the world.Scope of delivery:-1 pc. Mast foot, adjustable (V4 A / AISI 316)-2 pcs. Clamp bake, adjustable including screws (V4 A / AISI 316)-4 pc. Stringing piece including screws and nuts (stainless steel fine casting)-2 pcs. Cover plate including screws and nuts (V4 A / AISI 316)In addition, pipes required - not included in the scope of delivery:- 1 piece of mast tube 60.3 mm x 2 mm, length approx. 2.6 m- 2 pieces of strut pipe 21.3 mm x 2 mm, length approx. 2.3 m

The Superwind 350-II is a small wind generator for professional use, which also works autonomously and unattended under extreme conditions and reliably delivers energy. Ideal possible uses for the Superwind 350-II are, for example, the supply for sailing yachts, mountain huts, motorhomes or holiday homes.Based on the good experiences with the SW 353, version II of the SW 350 has received a technical update and is now using the full synchronous rotor blade adjustment.In combination with improved storage, this increases both the longevity and the turbulence resistance at difficult locations.The performance data and dimensions remain the same for the SW 350-II as the SW 350.The SW 350-II is still completely tied up and equipped with soft rotor blades and is therefore perfectly equipped for sailing yachts and similar people-close applications.Technical specifications:-Nenteit 350 W-Nennwind speed 12.5 m/s-Instwind speed 3.5 m/s-Tiastwind speed none-Rotord diameter 1.20 m-Blatt number 3-Rotor leaf material CFK-Rain -speed 500 - 1300 UPM-Generator permanent magnet-NNEN voltage 24 V DC-Riding control regulation rotor blade adjustment-Performance control rotor blade adjustment-Main brake briefing-Total weight 11.5 kg-Rotor shot, operation 70 NRotor shear power, extreme gust 220 N