Welcome to KlabauterShop

Marine Electrics & More in the Floating Webshop of KlabauterKiste

We are a team of young cruisers and run KlabauterShop from our boats.
We thus know a lot about boats and their systems and help you with any question you may have.

Shipping is done fast and reliable from our wholesale partner in Hamburg, Germany.

We ship all across Europe and also worldwide upon request.

Jan Athenstädt

sails the Med on his boat ahora

Matthias Rummel

is living on his Wanderling in the Caribbean

Anuschka & Josias

are discovering Greece and Turkey on their Tova

If you are interested in our lifestyle and our travels, check out this page about the Klabauter-Crew.

If you order in our shop, you are not only helping us to top up our cruising kitty, but you also support our work for the German online magazine KlabauterKiste and Jan's project BoatHowTo.

291 in stock

Cable oil flex solar XLS-R twin 2 x 2.5 qmm, tinned

Radiant-networked twin solar cable;Cross -section 2x2.5mm²,Outside diameter 4.8x9.9mm;Double isolated 900/1500 V;Temp. Area -40 ° to +100 ° C;UV-resistant;Fine -wound;black redSpecial prices for entire rings or roles: 10% or 15% discount - 50 m or 100 m per size. The right discount is automatically taken into account when determining the price.

€3.90*

65 in stock

Philippi - Weldyflex 50mm², black, Ø 14 mm

Single core highly flexible line for engine and battery installation.Extremely robust line suitable for use in cold, heat, as well as outdoors and in dry and moist environments.Oil-resistant and acid-proof.Outer sheath of rubber compound EM5.Temperature range -25 ° C ... + 85 ° C. Flame-retardant.Nominal voltage 100 V.Price per meterOn purchase of an entire race (50 meters) we give 25% discount.

€21.40* €22.70* (5.73% saved vs. recommended price)

54 in stock

Oil flex - polyurethane coat yellow, tinned - 2 x 2.5 mm²

Flexible hose line, 2-pole, with outer shell made of polyurethane, color yellow, wire insulation made of TPE, Core identification to VDE 0293. Temperature range -40 to 90 ° C. Cores of tinned copper wires, therefore highly resistant to corrosion. The PU jacket is very durable and abrasion resistant, high tensile strength and is worth provides resistant to oil, gasoline and many solvents. Ideal for outdoor installations or in the mast, and in the three-pole version also alsLandanschlussleitung.Cross-section 2 mm x 2.5 mm diameter ca. 10.0Prices are for cuts per meter. Special rates for all rings or rolls are available. If necessary, just ask the required amount. Usually there are 20% or 25% (depending on the amount of 50m or 100m) discount on all coils.

€7.10*

54 in stock

Philippi - Weldyflex 70mm², red, Ø 16 mm

Sin-wheeled highly flexible line for engine and battery installation.Extremely robust line suitable for use in cold, heat, as well as outdoors and in dry and damp rooms. Oil -resistant us acid festival.Outside mantle made of rubber mixing EM5.Temperature range -25 ° C to +85 ° C.Flamed.Nominal voltage 100V.Price per running meter.

€30.40* €32.00* (5% saved vs. recommended price)

35 in stock

Philippi - Weldyflex 35 mm², black, Ø 12 mm

Sin-wheeled highly flexible line for engine and battery installation.Extremely robust line suitable for use in cold, heat, as well as outdoors and in dry and damp rooms.Oil resistant and acid festival.Outside mantle made of rubber mixing EM5.Temperature range –25 ° C ...+85 ° C.Nominal voltage 100 V.Price per running meter

€15.40* €16.50* (6.67% saved vs. recommended price)

29 in stock

Philippi - RS694 - clutch plug, 5 -pin, 20 A / 400 V

-High permissible rated current-Easy and secure screw closures-Large connection compartment for simple and easy cable installation-Suitable for 400 V shore connection (4 + PE)-Schraubanschlüsse-Polzahl: 5-Anschlussquerschnitt max .: 2.5 mm²-Anschlussart: Schraubem-Kabeldurchlass: Pg 13.5 / 10-12 mm-Kontaktoberfläche: Ni-Protection according to VDE: IP65-Gehäusematerial: PBT-Nennstrom each contact: 20 AVoltage rating in accordance with VDE 0110/77: 400 V-Brennbarkeit UL-94: non-flammable

€27.90* €29.40* (5.1% saved vs. recommended price)

27 in stock

Philippi - Weldyflex 50mm², red, Ø 14 mm

€21.40* €22.70* (5.73% saved vs. recommended price)

12 in stock

NAVICO - LOWRANCE - N2K-T-RD NMEA 2000 T-connector

€23.56* €26.18* (10.01% saved vs. recommended price)

10 in stock

Philippi - Weldyflex 70mm², black, Ø 16 mm

€30.40* €32.00* (5% saved vs. recommended price)

10 in stock

NASA - Cruiser - Ride measuring system Logge

NASA Cruiser navigation instruments- Suitable for cockpit assembly or outdoor driving level- Easy installation, no large assemblers- Modern design- Very large digital display, easy to read- Dimensions (WXHXT): 132 mm x 98 mm x 29 mm- Blue backlight, can be switched off- simple and unproblematic operation- power supply 12 V- low energy consumptionCruiser driving system- Measurement area 0 to 30 nodes- Resolution 0.1 nodes- Daily miles and total parts meters- Calibration of the display via the keyboard possible- Genders with 7 m cable included in the scope of delivery

€157.90* €170.00* (7.12% saved vs. recommended price)

9 in stock

NASA - BattereMonitor BM -1 Compact - White

The BM-1 compactwurde for monitoring 12 V batterys, with a capacity of up to 600 ampers hours. The device is delivered entirely with a 100 A measuring resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board tension, the loading and discharge current and the loading status of the battery in percent as well as the time remaining for loading or unloading.By connecting a battery monitor, more efficient use of the battery is possible, the lifespan of the battery is extended and the risk of a failure is reduced. Specifications: Specifications:Supply voltage: 8-16 V DCBattery capacity: 5 - 600 AhDischarge current: max. 100 aCharging current: max. 100 aMeasurement resistance: 100 A / 50 MVDisplay of the currents: 0 - 9.9 a in 0.1 A steps, 10 - 100 A in 1.0 A stepsContrastful LC display, backlit for night operationParticularly compact display device, only 124 x 62 mm in size and only 23 mm deepVery low power consumption: only approx. 1.5 MAIM delivery cable: connecting cable from 100 A shunt to the battery with M8 ring cable shoe. 5 meter connecting cable from the display device to the shunt, with ring cable shoes for connection on the shunt, supply line with fuse and M8 ring cable shoe for the connection to the battery.

€164.90* €177.00* (6.84% saved vs. recommended price)

8 in stock

VICTRON - Smart Solar MPPT 75/15

Built-in Bluetooth Smart: No dongle neededThe wireless solution for set-up, monitoring and updating of the controller using Apple and Android smart phones, tablets or other devices.VE.DirectFor a wired data connection with a Color Control Panel, a PC or other devices.Ultra fast Maximum Power Point Tracking (MPPT)Especially in overcast sky, when the light intensity is constantly changing, improves an extremely fast MPPTRegler the energy yield compared to PWM charge controllers by up to 30% and in comparison to slower MPPT controllers by up to 10%.load outputOvercharging of the battery can be prevented by all loads are connected to the load output.The load output disconnects the loads when the battery has been up to a predetermined voltage value discharged.Alternatively, can also choose an algorithm for intelligent battery management: See Battery Life.The load output is short-circuit proof.Battery Life: intelligent battery managementIf the solar charging controller is not able to charge the battery within one day up to its full capacity, the status of the battery changes constantly "partially loaded" and between "the end of discharge" back and forth.This mode of operation (no regular full charging) damaged a lead-acid battery within a few weeks or months.The Battery Life algorithm monitors the state of charge of the battery and, if necessary he lifts every day the threshold value for separating the load on (i. E., The load is disconnected earlier) until the recovered energy sufficient to charge the battery up to almost 100%. From this point, the threshold value is modulated for the disconnection of the load, so that the charging nearly 100% is achieved about once weekly.Programmable battery charging algorithmFor more information, see the section Software on the Victron Energy website.Day / night time control and light insulation optionFor more information, see the section Software on the Victron Energy website.Options for programming, real-time data and display the course- Modern Apple and Android smartphones, tablets, Macbooks and other devices- Color Control PanelBattery voltage: 12/24 V automatic selectionNominal charging current: 15 ANominal PV power, 12 V 1a, b): 220WNominal PV power, 24V 1a, b): 440WMax. Short-circuit current of the solar system 2): 15AAutomatic load disconnect Yes, maximum load 15AMaximum PV open voltage: 75VPeak efficiency: 98%Power consumption 12V: 25 mA 24 V: 15 mA"Constant" -Ladespannung (absorption): 14.4V / 28.8 V (regulated)"Conservation" -Ladespannung (float): 13.8V / 27.6V (adjustable)Charging algorithm: multi-level, adaptiveTemperature Compensation: -16 mV / ° C and -32 mV / ° CUninterrupted / load current: 15 A 20 ASwitching off the load at a low voltage: 11.1 V / V 22.2 and 11.8 V / V or 23.6 Battery Life algorithmReconnecting the load to a low voltage: 13.1 V / 26.2 V or 14 V / 28 V or Battery Life algorithmProtection: reverse polarity of battery (backup) / Output short circuit / over-temperatureOperating Temperature: -30 ° C to +60 ° C (full rated output up to 40 ° C)Humidity: 95% non-condensingData communication port: VE.DirectConnections: 6 mm² / AWG10Protection class IP43 (electronic components), IP22 (connection area)Weight: 0.5 kgDimensions: (HxBxT) 100 x 113 x 40 mm1a) If more PV power is connected, the controller limits the input power1b) The PV voltage must reach at least the height of Vbat + 5 V, so that the controller receives the operation.After that, the minimum value of the PV voltage at Vbat + 1 V. is2) A higher short-circuit current can damage the regulator in the event of a reverse polarity connection of the PV system.

€68.54* €85.68* (20% saved vs. recommended price)

7 in stock

Philippi - RS692 - clutch can, 3 -pole, 16 A / 230 V

-High permissible rated current-Schraubanschlüsse-Small dimensions-Easy and secure screw closures-Large connection compartment for simple and easy cable installation-Also for 230 volts shore supply suitable number of poles: 2 + PE / 3-Anschlussquerschnitt max. : 2.5 mm²-Anschlussart: Screws-Kabeldurchlass 10-12 mm-Kontaktoberfläche: Ag-Protection according to VDE IP 66-Gehäusematerial: PBT gv-Nennstrom each contact 16 AVoltage rating in accordance with VDE: 230 V-Brennbarkeit UL-94: self-extinguishingsimilar image

€20.40* €21.80* (6.42% saved vs. recommended price)

7 in stock

Victron - Galvanian isolator VDI -16 - 16A

According to CE-Richtilinien, the state protection manager must be connected to the negative direct current of your yacht.This means that the saildrive, engine, valves and much more are almost automatically connected to the land protection manager. Due to the connection between the protective conductor and the negative direct current, there can be a galvanic balance between the neighboring yacht, the marina or other buildings in the water and its yacht.If your ship is protected with anodes, these are used up. The installation of a galvanic insulator reduces zinc consumption.The insulator is connected between the land connection and 230 V electrical system.Maximum electricity 16 A.Housing made of anodized aluminum, waterproof in epoxy, protection class IP 67.Weight 1 kg, dimensions (LXBXH): 200 x 120 x 60 mm.

€111.38* €139.23* (20% saved vs. recommended price)

6 in stock

Philippi - Galvanian Istor

Galvanic isolator AC 16A, Type Gi 16

€118.90* €125.00* (4.88% saved vs. recommended price)

6 in stock

NASA - memory battery for Target N147 / Navtex

Replacement battery/battery for soldering on the circuit board

€22.90* €23.90* (4.18% saved vs. recommended price)

5 in stock

Philippi RS692 - Land connection connector - 230 V / 16 a

Particularly compact and waterproof 230 V / 16 A shore power connectorConsisting of:Flanschgerätesteckdose with protective cap,Angle housing andShore power connector with protective cap.- 230 V / 50 Hz, max. 16 A- IP 66- 2 pole + earth- 2 caps- plus dimensions of the plugged connection cable entry (LxWxH): 135 x 53 x 36 mm.

€52.40* €55.50* (5.59% saved vs. recommended price)

5 in stock

Philippi - USB built -in socket USB C/A 3.6 ampere

USB Outlet12 / 24V DC / DC 5 V 1x2,5A, Type USB3Suitable for charging and operation of cell phones, digital cameras and other devices with USB interface. The integrated DC-DC converter generates the required 5 V operating voltage.DC 12 V or 24 V 2500 mA. Hole diameter 28 mm, fixing by means of hexagon nut. As can be seen in the figure, these mounting box has no Abdeckungl

€28.90* €30.70* (5.86% saved vs. recommended price)

4 in stock

VICTRON - Energy Meter EM24 - 3 Phasen mit Ethernet

With Ethernet connection.A maximum of 65a/phase.

€101.86* €127.33* (20% saved vs. recommended price)

4 in stock

NOA - double fitting for relay tubes

Universal fitting from aluminum.- Suitable for use of two parallel rail tubes, stanchions, bow and stern baskets, etc.- For pipe diameters of 25 mm (1 ").

€22.50*

4 in stock

PHILIPPI - RS694 - socket, 5-pole, 20 A / 400 V

-Hher permissible nominal current-Calm and safe thread locking-Large connection room for simple and light cable assembly-PABILE for 400 V land connection (4+PE)-Screw connections-Pole number: 5-Connection cross -section max.: 2.5 mm²-T type: screw chemical-Kabeld deferral: PG 13.5/10-12 mm-Kontakt surface: Ni-Protection type according to VDE: IP65-CHASE MASS: PBT-Nenstrom per contact: 20 a-NNEN voltage according to VDE 0110/77: 400 V-Brill after UL-94: non-flammable

€20.90* €22.30* (6.28% saved vs. recommended price)

4 in stock

Victron - Smart Battery Sense

Cerbo GX MK2: KommunikationszentrumDieses Kommunikationszentrum ermöglicht es Ihnen, Ihr System von jedem Ort aus stets perfekt zu kontrollieren und seine Leistung zu maximieren. Greifen Sie einfach über unser Victron Remote Management (VRM)-Portal auf Ihr System zu, oder greifen Sie direkt auf Ihr System zu, indem Sie den optionalen GX Touch 50 Bildschirm, ein Multifunktionsdisplay (MFD) oder unsere VictronConnect App dank ihrer Bluetooth-Fähigkeit verwenden.GX Touch 50: Display-ZubehörDer GX Touch 50 ist ein Display-Zubehör für den Cerbo GX MK2. Das Fünf-Zoll-Touchscreen-Display bietet einen sofortigen Überblick über Ihr System und ermöglicht Ihnen die Anpassung von Einstellungen. Schließen Sie das Display einfach mit nur einem Kabel an den Cerbo GX MK2 an. Der GX Touch 50 hat ein wasserdichtes Gehäuse, ist von oben montierbar und einfach zu installieren.Remote Console auf dem VRMÜberwachung, Steuerung und Konfiguration des Cerbo GX MK2 aus der Ferne, über das Internet. Genau so, wie wenn Sie vor dem Gerät stehen würden, mit Remote Console. Die gleiche Funktionalität steht auch im lokalen Netzwerk LAN oder über den WLAN-Zugangspunkt des Cerbo GX zur Verfügung.Perfekte Überwachung & SteuerungSofortige Überwachung des Ladezustands der Batterie, des Stromverbrauchs, der Energiegewinnung aus PV, Generator und Netz oder Überprüfung der Tankfüllstände und Temperaturmessungen. Steuern Sie einfach die Strombegrenzung für die Landstromeinspeisung, den (automatischen) Start/Stopp-Generator(en) oder ändern Sie beliebige Einstellungen, um das System zu optimieren. Nachverfolgung von Warnmeldungen, Durchführung diagnostischer Überprüfungen und Behebung von Komplikationen aus der Ferne.Einfache Montage und KonfigurationDer Cerbo GX MK2 ist leicht montierbar und kann mit dem DIN35-Adapter klein, (nicht im Lieferumfang enthalten) auch auf einer DIN-Schiene montiert werden. Sein separater Touchscreen kann auf ein Armaturenbrett geschraubt werden, so dass keine perfekten Ausschnitte (wie beim Color Control GX) erstellt werden müssen. Der Anschluss erfolgt einfach über ein einziges Kabel, so dass Sie nicht mehr so viele Drähte zum Armaturenbrett anbringen müssen. Die Bluetooth-Funktion ermöglicht eine schnelle Verbindung und Konfiguration über unsere App VictronConnect.Cerbo GX MK2Versorgungsspannung 8 – 70 VDCMontage Wand oder DIN-Schiene (35 mm)(2)SchnittstellenVE.Direct-Anschlüsse (immer isoliert) 3 (3)VE.Bus (immer isoliert) 2 parallel geschaltete RJ45-BuchsenVE.Can ja - nicht isoliertSonstigesÄußere Maße (H x B x T) 78 x 154 x 48 mmBetriebstemperaturbereich -20 bis +50 ℃NormenSicherheit Noch festzulegenEMC Noch festzulegenAutomobilbranche Noch festzulegenGX Touch 50Montage Mit mitgeliefertem MontagezubehörDisplayauflösung 800 x 480SonstigesÄußere Maße (H x B x T) 87 x 128 x 12,4 mmKabellänge 2 MeterAnmerkungen1. Ausführlichere Informationen über den Cerbo GX MK2 und die GX Touch Displays finden Sie auf der Seite Victron GX-Produktpalette bei Victron live:2. Für die Montage auf DIN-Schienen ist zusätzliches Zubehör erforderlich - DIN35 Adapter.3. Das im Abschnitt „Leistung“ in der obigen Tabelle aufgeführte Maximum ist die Summe der angeschlossenen VE.Direct-Geräte wie MPPT-Solarladeregler. Gesamt bedeutet alle direktangeschlossenen Geräte plus die über USB angeschlossenen Geräte. Der Grenzwert wird hauptsächlich durch die CPU-Verarbeitungsleistung bestimmt. Beachten Sie, dass es auch einen Grenzwert für die anderen Gerätetypen gibt, von denen oft mehrere angeschlossen sind: PVWechselrichter.An einem CCGX können typischerweise bis zu drei oder vier dreiphasige Wechselrichter überwacht werden. CPU-Geräte mit höherer Leistung können mehr überwachen.

€251.33* €314.16* (20% saved vs. recommended price)

4 in stock

Philippi - CEE - IP X7 coupling - waterproof

Shore connection coupling watertight (IP67 / IP X7) (not included) in conjunction with associated feed connector2-pole + E, 230 V, max.16 A.

€27.40* €29.00* (5.52% saved vs. recommended price)

3 in stock

Philippi - security holder with lid

Strip fuse holder with coverType SHDDelivery without strip fuse.

€25.90* €27.50* (5.82% saved vs. recommended price)