The Airmar P79 is a special provider for inaminating in GRP flinels. This eliminates the piercing of the fuselage. The encoder also adapts to a trunk killing of up to 22 degrees. This ensures that the donor beam is precisely aligned for a precise depth display. The giver's setting ring is firmly laminated on the fuselage from the inside and then filled with frost protection. The efficiency of this interior fan is much better than the installation method would suggest. Even in commercial shipping, the installation of laminate providers is common.Compared to a breakthrough or rear mirror, only low losses in performance can be expected.Dimensions (DXH): 98 x 89 mm- Frequency 50 kHz 200 kHz- Total width 45 degrees 12 degrees- Lot depth max. 206 - 294 m 118 - 180 m- Connection cable approx. 10m (33ft)The 9-pin black Xsonic connector is suitable for many current navico devices, e.g. for Lowrance HDS Carbon, Elite-Ti, Simrad Evo³, Go XSE and XSR, B&G Zeus³, Vulcan FS.
€159.40*
€177.31*(10.1% saved vs. recommended price)
for connecting an older sonar transducer with blue 7-pin connector to a newer device with black 9-pin-Xsonic jack.Length 50 cm.The 9-pin black Xsonic plug is suitable for many current Navico devices, such as for Lowrance HDS Carbon, Elite TI, Simrad evo³, GO XSE and XSR, B & G Zeus³, Vulcan FS.
HDI transducer (transom encoder) for CHIRP fish finder; MEDIUM / HIGH CHIRP - 83/200 kHz and DownScan Imaging; 455/800 kHz, for depths up to 300 m, m DownScan function to about the 90thConnecting cable 6m.The 9-pin black Xsonic plug is suitable for many current Navico devices, such as for Lowrance HDS Carbon, Elite TI, Simrad evo³, GO XSE and XSR, B & G Zeus³, Vulcan FS.
€155.40*
€172.55*(9.94% saved vs. recommended price)
To connect a donor with (black) 9-pin connector to an older device with (blue) 7-pin socket.Usable for donors with analog temperature sensor.Length 50 cm.The 7-pin blue plug is suitable for many older navico devices, e.g. lowrance HDS series with integrated echo sound, Elite HDI, Elite Circ, Simrad NSS EVO1 and EVO2, GO (except XSE / XSR), B&G Vulcan (except FS / R), as well as BSM-1 and Sonar hub.A notice:With this cable, the XID function is not possible for automatic encoder detection. Therefore, this cable should not be used for CHIRP providers.
Transom sender depth 83/200 kHz (Medium / High CHIRP) and temperature- depth sounder angle 20 °- integrated temperature sensor- Connection cable 6 mThe 9-pin black Xsonic plug is suitable for many current Navico devices, such as for Lowrance HDS Carbon, Elite TI, Simrad evo³, GO XSE and XSR, B & G Zeus³, Vulcan FS.
€98.40*
€109.47*(10.11% saved vs. recommended price)
Blue HDI transducer (rear mirror) for CHIRP Fischfinder; Medium / high chirp - 83/200 kHz and downscan imaging; 455/800 kHz, for depths up to approx. 300 m, downscan function up to approx. 90 m.Length of the connection cable: 2.00 m.The 9-pin black Xsonic connector is suitable for many current navico devices, e.g. for Lowrance HDS Carbon, Elite-Ti, Simrad Evo³, Go XSE and XSR, B&G Zeus³, Vulcan FS.
€155.40*
€172.54*(9.93% saved vs. recommended price)
Blue HDI transducer (rear mirror) for CHIRP Fischfinder; Medium / high chirp - 83/200 kHz and downscan imaging; 455/800 kHz, for depths up to approx. 300 m, downscan function up to approx. 90 m.Connection cable 6m.The 9-pin black Xsonic connector is suitable for many current navico devices, e.g. for Lowrance HDS Carbon, HDS Live, Elite-Ti, Elite-Ti², Elite FS, Simrad Evo³, Go XSE and XSR, B&G Zeus³, Vulcan fs.
€152.90*
€170.17*(10.15% saved vs. recommended price)
HDI transducer (rear mirror) for CHIRP Fischfinder; Low / high chirp - 50/200 kHz and downscan imaging; 455/800 kHz, for depths up to approx. 750 m, downscan function up to approx. 90 m.The 9-pin black Xsonic connector is suitable for many current navico devices, e.g. for Lowrance HDS Carbon, Elite-Ti, Simrad Evo³, Go XSE and XSR, B&G Zeus³, Vulcan FS.
€304.90*
€339.15*(10.1% saved vs. recommended price)
To connect a new mountain with (black) 9-pin connector to an older device with (blue) 7-pin socket.With XIDThe cable enables automatic detection of the donor (automatic detection XID).Recommended for use with Circulation.Temperature values are not transmitted.Length 50 cm.The 7-pin blue plug is suitable for many older navico devices, e.g. lowrance HDS series with integrated echo sound, Elite HDI, Elite Circ, Simrad NSS EVO1 and EVO2, GO (except XSE / XSR), B&G Vulcan (except FS / R), as well as BSM-1 and Sonar hub.
The AIRMAR P319 is a 50/200 kHz through hull transducer with a single ceramic element in a low profile case. This housing optimized for a water resistance, on the other, this sensor is suitable for trailer boats and thus a good alternative to the damage-prone transom donors.- frequency 50 kHz to 200 kHz- bevel width 45 ° 12 °- Lottiefe max. 235-353 m 118-206 mThe 9-pin black Xsonic plug is suitable for many current Navico devices, such as for Lowrance HDS Carbon, Elite TI, Simrad evo³, GO XSE and XSR, B & G Zeus³, Vulcan FS.
€180.90*
€201.11*(10.05% saved vs. recommended price)
Breakthrock for depth and temperature- Medium CHIRP - Frequency 95-155kHz- Max. Depth 1500ft / 457m- Installation diameter 51mmThe 9-pin black Xsonic connector is suitable for many current navico devices, e.g. for Lowrance HDS Carbon, Elite-Ti, Simrad Evo³, Go XSE and XSR, B&G Zeus³, Vulcan FS.
€566.40*
€629.51*(10.03% saved vs. recommended price)
This website uses cookies to ensure the best experience possible.